Location: Home > Announcements > Conferences
1 INTRODUCTION
The 14th International Conference on Measurement and Control of Granular Materials (MCGM’ 2023) will be held in Shenyang, China from May 12–13, 2023. Secretariat of the Conference warmly invites and welcomes researchers and industrial experts in the world to present their papers at the Conference of the MCGM’ 2023. There will be oral presentations as well as exhibitions in the fields of MCGM.
SPECIAL NOTE
The 14th International Conference on MCGM will be held at conference site and online (via VooVMeeting, only on May 12, see section 3).
1.1 DATE & LOCATION
l Checking-in Time2023 May 11th 9:00~17:00.
l Conference Date: 2023 May 12~13th .
l Location: International Academic Exchange Center of Northeastern University (80 Wenti West Road, Heping District, Shenyang, P. R. China).
1.2 STAFF
ORGANIZER
International Federation of Measurement and Control of Granular Materials (IFMCGM)
CO-ORGANIZER
l Northeastern University, China
l Villo-EnvSafe Environmental Protection & Safety Institute (SuZhou) Co., Ltd.
SPONSORS
l China University of Petroleum-Beijing
l Changwon University, Korea
l Chinese Society of Particuology, China
l Society of Powder Technology, Japan
l The Chinese Society for Measurement, China
l China Instrument Society, China
l The Architectural Society of China
l Korea Assoc. Powder Process Industry and Engineering
l Center for Bulk Solids and Particulate Technology, Australia
l Chinese Ceramic Society, China
l Powder Center, Tsinghua University, China
l Korean Powder Metallurgy Institute, Korea
l Research Center for Applied System Safety, Germany
l Xi’an University of Architecture and Technology, China
l Shenyang Society for Science and Technology, China
ORGANIZING COMMITTEE
Prof. Xie Zhi | (Chair, China) | Mr. Liu Jun | (China) | |
Prof. Wang Yutao | (Vice-Chair, China) | Dr. Qian-Qiu Zhao | (USA) | |
Prof. Mark G Jones | (Vice-Chair, Australia) | Prof. Yao Jun | (China) | |
Prof. Hee-Kyu Choi | (Vice-Chair, Korea) | Prof. Takuya Tusji | (Japan) | |
Prof. Guosheng Gai | (Vice-Chair, China) | Dr. Guang-Liang Liu | (USA) | |
Prof. Jian-Yong Zhang | (Vice-Chair, UK) | Prof. Yasushiji Mori | (Japan) | |
Prof. Siegfried Radandt | (Vice-Chair, Germany) | Prof. Zhi-Peng Wu | (UK) | |
Prof. Kunihiro Fukui | (Vice-Chair, Japan) | Prof. Mikio Sarkai | (Japan) | |
Prof. Shuji Matsusaka | (Vice-Chair, Japan) | Mr. Dong Qingyun | (China) | |
Prof. Li Xinguang (Secretary-General, China) | Prof. Dieter Mewes | (Germany) | ||
Prof. Han Yuexin | (China) | Prof. Byung-Kee Kim | (Korea) | |
Prof. Jong-Kil Kim | (Korea) | Prof. Renliang Xu | (USA) | |
Dr. Zhong Shengjun | (China) | Prof. Floriana La Marca | (Italy) | |
Prof. Cai Xiaoshu | (China) | Prof. Albrecht Vogl | (Germany) | |
Prof. Stefan Luding | (Netherlands) | Prof. Sugun Lim | (Korea) | |
Prof. Xue-Zhong Wang | (UK) | Prof. Zhao Difang | (China) | |
Prof. Li Gang | (China) | Dr. Jianye Shi | (Germany) | |
Mr. Xing Deli | (China) | Dr. Bin Chen | (Australia) | |
Prof. Jin Zhixian | (Consultant, China) | |||
1.3 CONTACT
LOCAL ORGANIZING COMMITTEE
Secretary-General: Prof. Li Xinguang
Vice Secretary-General: Wang Zhao, Jiang Guanyu
Members: Zhai Xiaoming, Liu Yuliang, Guo Yue, Jin Zhixian (Consultant)
2 CALL FOR PAPERS
2.1 TOPICS
1. All measurement of granular materials, powder, lump, pulp, etc.: temperature, density, pressure, humidity, flow, viscosity, velocity, turgidity, level, size, weight, shape, moisture, composition, etc.
2. Process measuring and control:
l Mining and mineral: material handling, grinding, transportation, classifying, mining equipment, floatation, crushing, etc.
l Metallurgy: material preparation, pyrometallurgy, sintering, etc.
l Cement and ceramic: materials preparation, roast, forming, packing, staving, firing.
l Coal processing: pulverization, transportation, fluidizing, etc.
l Nanomaterials: preparation, processing and testing.
3. All process control of granular materials in following industries: coal, oil, chemistry, medicine, food, grain, textile, paper making, water & air treatment, dust & powder treatment.
4. Powder Explosion and Processing Safety.
5. Standardization of Powder Products and Samples.
6. Other topics related to measurement instrument, sensors, devices and control systems, AI systems.
2.2 ABSTRACTS AND FULL PAPERS
An abstract of more than 400 words with 5 key words should include: The title of paper, name(s) of the author(s) and e-mail addresses. The full paper should have more than 4 pages. Both abstracts and full papers should be written in English and in the Microsoft Word format and be emailed to us (see 1.2).
3 JOIN ONLINE
You can join the conference online for free using the meeting software VooVMeeting.
Download and install meeting software VooVMeeting (https://voovmeeting.com), sign up with your local phone number, and join our meeting with the following information:
l Meeting ID: 935 504 086
l Password: 230512
REGISTRATION
You need to register before getting into the meeting room. Please fill your name and organization in VooVMeeting and wait for our authentication. The registration can be done right when you see this announcement.
The registering entering interface is shown as the left picture. If you find the interface is not displayed properly, like the right picture, try to resize the browser window (making it smaller).
4 PROGRAM
4.1 Main Conference
Date:May 12th.
Venue: Ball Room (2F)
Time | Content | Host |
08:30-08:40 | President Speech (Wang Yutao) | Gai |
08:40-08:50 | Speech of dean, School of Information Science and Engineering, NEU, China (Yang Guanghong) | |
08:50-09:10 | Data Analytics and Optimization for Smart Industry (Tang Lixin, China) | |
09:10-09:45 | Research on Low-carbon and Efficient Utilization Technology of Difficult-to-select Iron Ore Resources (Han Yuexin, China) | |
09:45-10:20 | Trends in Particle Characterization (Renliang Xu, USA) | |
10:20-10:35 | Photo | |
10:35-10:50 | Tea Break | |
10:50-11:25 | Quality Control in Powder Processing (Qianqiu Zhao, USA) | |
11:25-12:00 | The Study of a SERS-based Diagnostic Method for the Occlusion of Coronary Arteries (Cai Xiaoshu, China) | |
11:55-14:00 | Lunch | |
14:00-14:35 | The Demand for Powder Processing Technology and Equipment of China's Manufacturing Industry in the Process of Transformation and Upgrading (Gai Guosheng, China) | Cai |
14:35-15:05 | Detection of Powder Flow Parameters and Its Application (Wang Yutao, China) | |
15:05-15:35 | On Electrostatics of the Granular Flow in a Pneumatic Conveying System (Yao Jun, China) | |
15:35-15:50 | Tea Break | |
15:50-16:25 | Application of Powder Technology in New Energy Batteries (Liu Guangliang, China) | |
16:25-17:00 | The Latest Progress and Future Development Direction of Domestic Laser Particle Size Analysis Technology and Instruments (Dong Qingyun, China) |
4.2 Branch Conference on Dust Explosion
Date: May 13th.
Venue: Ju Xian Hall (2F)
Time | Content | Host |
09:00-09:30 | Introduction to Draft National Standard “General Requirements for Explosion Prevention and Protection in Combustible Dust Processing Systems ” (Zhong Shengjun, China) | Zhong |
09:30-10:00 | Effect of Ventilation System Design and Explosive Atmosphere Classification (Wu Shenghong, China Taiwan) | |
10:00-10:30 | Explosion Risk Assessment Based on ATEX 137 for the Factories (Jin Xin, China) | |
10:30-10:45 | Tea Break | |
10:45-11:10 | How to Design Dust Explosion Protection System (Liu Bo, China) | |
11:10-11:35 | Basic Applications Related to Safety Protection of Powder-elated and Explosive-related Enterprises (Shu Yuan, China) | |
11:35-12:00 | Protecting Installations Dealing with St3 Combustible Dusts (Ing. Kristof De Gersem, Belgium) |
4.3 Branch Conference on Standardization and Industrial Application
Date: May 13th.
Venue: Meeting Room 405 (4F)
Time | Content | Host |
09:00-09:10 | President Speech (Wang Yutao, China) | Wang |
09:10-09:30 | History and Development of IFMCGM (Jin Zhixian, China) | |
09:30-09:50 | Work Report of Committee of Standardization and Industrial Application, and Beginning of Revise on GB 29526/GB 29527 (Gai Guosheng, China) | |
09:50-10:15 | Development of Standard Sample for Accuracy Evaluation of Strength Test (Zhu Zaisheng, China) | |
10:15-10:35 | Metal Powder Particle Shaping and Polishing for 3D Printing and Soft Magnetic Materials (Jing Min, China) | |
10:35-10:50 | Tea Break | |
10:50-11:15 | Advanced Separation Technology (Robert Lytkowski, USA) | |
11:15-11:40 | The Relationship between Mixing and Feeding Technologies and the High Quality Food Processing Industry in Japan (Yasuo Iwako, Japan) | |
11:40-12:00 | The Difference and Standardization of Materials and Raw Materials Can Be Seen from the Influence of Particle Morphology on Material Properties (Wang Zhao, China) |
